IoT Digital UV COD BOD TOC Sensor

Short Description:

★ Model No: BH-485-COD

★ Protocol: Modbus RTU RS485 

★ Power Supply: DC12V

★ Features: UV light principle, 2-3 years life time

★ Application: Sewage water, ground water, river water, sea water

 


  • facebook
  • linkedin
  • sns02
  • sns04

Product Detail

User Manual

Measuring Principle

Online COD sensor is based on the absorption of ultraviolet light by organic matter, and uses the 254 nm spectral absorption coefficient SAC254 to reflect the important measurement parameters of soluble organic matter content in water, and can be converted into COD value under certain conditions. This method allows for continuous monitoring without the need for any reagents.

Main Features

1) Directly immersion measurement without sampling and pre-processing

2) No chemical reagents, no secondary pollution

3) Quickly response time and continuous measurement

4) With automatic cleaning function and few-maintenance

BH-485-COD UV COD Sensor 3 588A5081 BH-485-COD UV COD Sensor 4

Application

1) Continuous monitoring of organic matter load in the sewage treatment process

2) On-line real-time monitoring of  influent and outflow water of the wastewater treatment

3) Application:surface water, industrial discharge water, and fishery discharge water etc

Technical parameters of COD Sensor

Measuring range 0-200mg, 0~1000mg/l COD (2mm optical path)
Accuracy ±5%
Measurement interval minimum 1 minute
Pressure range ≤0.4Mpa
Sensor material SUS316L
Storage temp -15℃ ~ 65℃
Operating temperature 0℃~45℃
Dimension 70mm*395mm(Diameter*length)
Protection IP68/NEMA6P
Cable length Standard 10m cable, can be extended to 100 meters

  • Previous:
  • Next:

  • BH-485-COD User Manual

  • Write your message here and send it to us