Online Secondary Water Supply Turbidity Sensor

Short Description:

★ Model No: BH-485-ZD

★ A continuous reading turbidity meter designed for low range turbidity monitoring

★ The data is stable and reproducible

★ Easy to clean and maintain

★ Protocol: Modbus RTU RS485

★ Power Supply: DC24V(19-36V)

★ Application: surface water, tap water factory water, secondary water supply etc

Send email to us

Product Detail

User Manual

Brief Introduction

The high-precision turbidity sensor directs the parallel light from the light source into the water sample in the sensor, and the light is scattered by the suspended

particles in the water sample, and the scattered light that is 90 degrees from the incident angle is immersed in the silicon photocell in the water sample. The receiver

receives the turbidity value of the water sample by calculating the relationship between the 90-degree scattered light and the incident beam.

Features

①A continuous reading turbidity meter designed for low range turbidity monitoring;

②The data is stable and reproducible;

③Easy to clean and maintain;

https://www.boquinstruments.com/iot-digital-turbidity-sensor-product/

Technical Indexes

Size	Length 310mmWidth 210mmHeight 410mm
Weight	2.1KG
Main Material	Machine：ABS + SUS316 L
	Sealing Element: Acrylonitrile Butadiene Rubber
	Cable: PVC
Waterproof Grade	IP 66 / NEMA4
Measuring Range	0.001-100NTU
Measurement Accuracy	The deviation of reading in 0.001~40NTU is ±2% or ±0.015NTU, choose the bigger one; and it is ±5% in the range of 40-100NTU.
Flow Rate	300ml/min≤X≤700ml/min
Pipe Fitting	Injection Port: 1/4NPT; Discharge Outlet: 1/2NPT
Power supply	12VDC
Communication protocol	MODBUS RS485
Storage Temperature	-15~65℃
Temperature Range	0~45℃
Calibration	Standard Solution Calibration, Water Sample Calibration, Zero Point Calibration
Length of Cable	Three-meter standard cable, it is not recommended to extend.
Warranty	One year