Drinking Water Online Digital Turbidity Sensor

Short Description:

★ Model No: BH-485-ZD

★ A continuous reading turbidity meter designed for low range turbidity monitoring

★ The data is stable and reproducible

★ Easy to clean and maintain

★ Protocol: Modbus RTU RS485 

★ Power Supply: DC24V(19-36V)

★ Application: surface water, tap water factory water, secondary water supply etc


  • facebook
  • linkedin
  • sns02
  • sns04

Product Detail

User Manual

Brief Introduction

The high-precision turbidity sensor directs the parallel light from the light source into the water sample in the sensor, and the light is scattered by the suspended

particles in the water sample, and the scattered light that is 90 degrees from the incident angle is immersed in the silicon photocell in the water sample. The receiver

receives the turbidity value of the water sample by calculating the relationship between the 90-degree scattered light and the incident beam.

Features

①A continuous reading turbidity meter designed for low range turbidity monitoring;

②The data is stable and reproducible;

③Easy to clean and maintain;

 Technical Indexes

Size

Length 310mm*Width 210mm*Height 410mm

Weight

2.1KG

Main Material

Machine:ABS + SUS316 L

 

Sealing Element: Acrylonitrile Butadiene Rubber

 

Cable: PVC

Waterproof Grade

IP 66 / NEMA4

Measuring Range

0.001-100NTU

Measurement Accuracy

The deviation of reading in 0.001~40NTU is ±2% or ±0.015NTU, choose the bigger one; and it is ±5% in the range of 40-100NTU.

Flow Rate

300ml/min≤X≤700ml/min

Pipe Fitting

Injection Port: 1/4NPT; Discharge Outlet: 1/2NPT

Power supply 12VDC
Communication protocol MODBUS  RS485

Storage Temperature

-15~65℃

Temperature Range

0~45℃

Calibration

Standard Solution Calibration, Water Sample Calibration, Zero Point Calibration

Length of Cable

Three-meter standard cable, it is not recommended to extend.

Warranty

One year


  • Previous:
  • Next:

  • Write your message here and send it to us