Historical Products
-
Wholesale China Conductivity Tds Salinity Meter Quotes Manufacturer – BH-485-DD Digital Conductivity Sensor – BOQU
Features · Can work stably for a long time. · Built in temperature sensor, real-time temperature compensation. · RS485 signal output, strong anti-interference ability, the output range of up to 500m. · Using the standard Modbus RTU (485) communication protocol. · The operation is simple, the electrode parameters can be achieved by remote settings, remote calibration of electrode. · 24V DC power supply. -
BH-485-ORP Digital ORP Sensor
★ Measure range: -2000mv~+2000mv
★ Protocol: Modbus RTU RS485
★ Features: rapid response, strong anti-interference ability
★ Application: waste water, river water, swimming pool -
Good Environmental Resistance Residual Chlorine Sensor
★ Model No: YLG-2058-01
★ Principle: Polarography
★ Measure range: 0.005-20 ppm (mg/L)
★ The minimum detection limit:5ppb or 0.05mg/L
★ Accuracy:2% or ±10ppb
★ Application: Drinking water, swimming pool, spa, fountain etc
-
Industrial Online Residual Chlorine Sensor
★ Model No: YLG-2058-01
★ Principle: Polarography
★ Measure range: 0.005-20 ppm (mg/L)
★ The minimum detection limit:5ppb or 0.05mg/L
★ Accuracy:2% or ±10ppb
★ Application: Drinking water, swimming pool, spa, fountain etc
-
Online Low Cost Free Residual Chlorine Controller Detector Analyzer
★ Model No: CL-2059A
★ Output: 4-20mA
★ Protocol: Modbus RTU RS485
★ Power Supply: AC220V or DC24V
★ Features: Rapid response, strong anti-interference ability
★ Application: Waste water, river water, swimming pool
-
DOS-118F Lab Dissolved Oxygen Sensor
1.Measuring range: 0-20mg/L
2.Measured water temperature: 0-60℃
3.Electrode shell material: PVC
-
Laboratory pH Sensor
★ Model No: E-301T
★ Measure parameter: pH, temperature
★ Temperature range: 0-60℃
★ Features: The three-composite electrode has stable performance,
It is resistant to collision;
It can also measure the temperature of te aqueous solution
★ Application: Laboratory, domestic sewage, industrial wastewater, surface water,
secondary water supply etc
-
PHG-3081 Industrial PH Meter
PHG-3081 industrial pH meter is our latest generation of microprocessor-based instrument, with English display, menu operation, a high intelligent, multi-function, high measurement performance, environmental adaptability and other characteristics. It is a highly intelligent online continuous monitoring instrument, integrate with the sensor and the second meter. Can be equipped with three composite or two composite electrodes to meet a variety of sites. Can be widely used for continuous monitoring of PH value for thermal power, chemical fertilizer, metallurgy, environmental protection, pharmaceutical, biochemical, food and water and other solution.
