Historical Products
-
China Wholesale Multiparameter Ph Meter Quotes Manufacturer - BH-485-PH8012 Digital pH Sensor – BOQU
Characters · The characteristics of industrial sewage electrode, can work stably for a long time. · Built in temperature sensor, real-time temperature compensation. · RS485 signal output, strong anti-interference ability, the output range of up to 500m. · Using the standard Modbus RTU (485) communication protocol. · The operation is simple, the electrode parameters can be achieved by remote settings, remote calibration of electrode. · 24V DC power supply. -
China Wholesale Ph And Conductivity Meter Price Quotes Manufacturer - PH8012 Industrial Waste Water PH Sensor – BOQU
Model No.: PH8012 Measuring range: 0-14pH Temperature range:0-60℃ Compressive strength:0.6MPa Slope: ≥96％ Zero point potential: E0=7PH±0.3 Internal impedance: 150-250 MΩ (25℃) Profile: 3-in-1Electrode (Integrating the temperature compensation and the solution grounding) Installation size: Upper and Lower 3/4NPT Pipe Thread Connection: Low-noise cable goes out directly. Application: Applicable to various industrial sewages, environmental protection and water treatment. ... -
Wholesale China Residual Chlorine Analyzer&Sensor Manufacturers Pricelist - YLG-2058-01 Industrial Residual Chlorine Sensor – BOQU
Working principle Electrolyte and osmotic membrane separates the electrolytic cell and water samples, permeable membranes can selectively to ClO- penetration; between the two electrode has a fixed potential difference, current intensity generated can be converted into residual chlorine concentration. At the cathode: ClO- + 2H+ + 2e- → Cl-+ H2O At the anode: Cl- + Ag → AgCl + e- Because in a certain temperature and pH conditions, HOCl, ClO- and residual chlorine between fixed conversion rela... -
Wholesale China Uv Cod Sensor Factory Suppliers - TPG-3030 Industrial Total Phosphorus Analyzer – BOQU
The sample to be tested does not require any pretreatment. The water sample riser is directly inserted into the system water sample, and the total phosphorus concentration can be measured. The maximum measurement range of this equipment is 0.1~500mg/L TP. This method is mainly used for on-line automatic monitoring of total phosphorus concentration of waste (sewage) water discharge point source, surface water, etc. -
Wholesale China Water Ph Controller Factory Suppliers - PH5806-S8 High-temperature PH Sensor – BOQU
Features 1. It adopts heat-resisting gel dielectric and solid dielectric double liquid junction structure; in the circumstances when the electrode is not connected to the back pressure, the withstand pressure is 0.4MPa. It can be directly used for l30℃ sterilization. 2. There is no need for additional dielectric and there is a little amount of maintenance. 3. It adopts K8S and PGl3.5 thread socket, which can be replaced by any overseas electrode. 4. For the electrode length, there are 120, 15... -
China Wholesale Conductivity Metre Quotes Manufacturer - BH-485-DD-1.0 Digital Conductivity Sensor – BOQU
Features · Can work stably for a long time. · Built in temperature sensor, real-time temperature compensation. · RS485 signal output, strong anti-interference ability, the output range of up to 500m. · Using the standard Modbus RTU (485) communication protocol. · The operation is simple, the electrode parameters can be achieved by remote settings, remote calibration of electrode. · 24V DC power supply. -
Wholesale China Ph Analyzer Transmitter Suppliers Factories – PH8011 Industrial Antimony PH Sensor – BOQU
Features 1. It adopts the world-class solid dielectric and a large area of PTFE liquid for junction, difficult to block and easy to maintain. 2. Long-distance reference diffusion channel greatly extends the service life of electrodes in the harsh environment. 3. There is no need for additional dielectric and there is a little amount of maintenance. 4. High accuracy, fast response and good repeatability. -
Wholesale China Conductivity Meter For Salt Water Suppliers Factories – BH-485-DD Digital Conductivity Sensor – BOQU
Features · Can work stably for a long time. · Built in temperature sensor, real-time temperature compensation. · RS485 signal output, strong anti-interference ability, the output range of up to 500m. · Using the standard Modbus RTU (485) communication protocol. · The operation is simple, the electrode parameters can be achieved by remote settings, remote calibration of electrode. · 24V DC power supply.
