DOS-118F Lab Dissolved Oxygen Sensor

Short Description:

1.Measuring range: 0-20mg/L

2.Measured water temperature: 0-60℃

3.Electrode shell material: PVC


  • facebook
  • linkedin
  • sns02
  • sns04

Product Detail

What is Dissolved Oxygen (DO)?

Why Monitor Dissolved Oxygen?

Product description

Measuring range 0-20mg/L
Measured water temperature 0-60℃
Electrode shell material PVC
Temperature compensation resistor 2.252K, 10K, 22K, Ptl00, Pt1000
Sensor life >1years
Cable length 1 m or 2m(double shielded)
Detection lower limit 0.1 mg/L (ppm) (20℃)
Measurement upper limit 20mg/L(ppm)
Response time ≤l min(90%, 20℃)
Polarization time >2min
Minimum flow rate 2.5cm/s
Drift <3%/month
Measurement error <±1 PPM
Air current 80-100nA (25℃)
Polarization voltage 0.7V
Zero oxygen <5PPb(3min)
Calibration intervals >60 days

  • Previous:
  • Next:

  • Dissolved oxygen is a measure of the amount of gaseous oxygen contained in water. Healthy waters that can support life must contain dissolved oxygen (DO).
    Dissolved Oxygen enters water by:
    direct absorption from the atmosphere.
    rapid movement from winds, waves, currents or mechanical aeration.
    aquatic plant life photosynthesis as a by-product of the process.

    Measuring dissolved oxygen in water and treatment to maintain proper DO levels, are crucial functions in a variety of water treatment applications. While dissolved oxygen is necessary to support life and treatment processes, it can also be detrimental, causing oxidation that damages equipment and compromises product. Dissolved oxygen affects:
    Quality: The DO concentration determines the quality of source water. Without enough DO, water turns foul and unhealthy affecting the quality of the environment, drinking water and other products.

    Regulatory Compliance: To comply with regulations, waste water often needs to have certain concentrations of DO before it can be discharged into a stream, lake, river or waterway. Healthy waters that can support life must contain dissolved oxygen.

    Process Control: DO levels are critical to control biological treatment of waste water, as well as the biofiltration phase of drinking water production. In some industrial applications (e.g. power production) any DO is detrimental for steam generation and must be removed and its concentrations must be tightly controlled.

  • Write your message here and send it to us