Featured
-
-
China Wholesale Portbale Conductivity Meter Manufacturers Pricelist - DDG-GY Industrial Inductive Conductivity/TDS Sensor – BOQU
Features 1. Performance in harsh chemical environments is excellent, chemical resistant material manufactured by the electrode is not polarized interference, to avoid dirt, grime and even affect fouling layer covering phenomena such as very poor, simple and easy to install so it’s a very wide range of applications. Design electrodes applied to a high concentration of acids (such as fuming sulfuric acid) environment. 2. English acid concentration meter use, high accuracy, and high stabil... -
China Wholesale Cod Sensor Factory Suppliers - TPG-3030 Industrial Total Phosphorus Analyzer – BOQU
The sample to be tested does not require any pretreatment. The water sample riser is directly inserted into the system water sample, and the total phosphorus concentration can be measured. The maximum measurement range of this equipment is 0.1~500mg/L TP. This method is mainly used for on-line automatic monitoring of total phosphorus concentration of waste (sewage) water discharge point source, surface water, etc. -
Wholesale China Acid Alkaline Concentration Manufacturers Pricelist - SJG-2083CS Online Acid Alkaline Concentration Meter – BOQU
1 Measurement range: HNO3: 0～25.00%;H2SO4: 0～25.00% 92%~100%;HCL: 0～20.00% 25～40.00)%;NaOH: 0～15.00% 20～40.00)%; 2 Accuracy: ±2%F.S; 3 Resolution: 0.01%; 4 Repeatability: ＜1%; 5 Temperature sensors: Pt1000 etc; 6 Temperature compensation range: 0～100℃; 7 Output: 4-20mA, RS485(optional) 8 Alarm relay: 2 normally open contacts are optional, AC220V 3A /DC30V 3A; 9 Power supply: AC(85～265) V Frequency ( 45～65)Hz; 10 Power: ≤15W; 11 Overall dimension: 144 mm×... -
Wholesale China Ultrapure Water Conductivity Meter Suppliers Factories - DDS-1706 Laboratory Conductivity Meter – BOQU
DDS-1706 is an improved conductivity meter; based on DDS-307 on the market, it is added with the automatic temperature compensation function, with high price-performance ratio. It can be widely used for continuous monitoring of conductivity values of the solutions in thermal power plants, chemical fertilizer, metallurgy, environmental protection, pharmaceutical industry, biochemical industry, foodstuff and running water. -
Wholesale China Electrical Conductivity Meter Suppliers Factories - DDG-10.0 Industrial Conductivity Sensor – BOQU
The conductivity industrial series of electrodes are specially used for the measurement of conductivity value of pure water, ultra-pure water, water treatment, etc. It is especially suitable for conductivity measurement in the thermal power plant and the water treatment industry. It is featured by the double-cylinder structure and the titanium alloy material, which can be naturally oxidized to form the chemical passivation. Its anti-infiltration conductive surface is resistant to all kinds of... -
Wholesale China Waste water Ph Probe Factory Suppliers - BH-485-PH8012 Digital pH Sensor – BOQU
Characters · The characteristics of industrial sewage electrode, can work stably for a long time. · Built in temperature sensor, real-time temperature compensation. · RS485 signal output, strong anti-interference ability, the output range of up to 500m. · Using the standard Modbus RTU (485) communication protocol. · The operation is simple, the electrode parameters can be achieved by remote settings, remote calibration of electrode. · 24V DC power supply. -
Wholesale China Digital Ph Analyzer Manufacturers Pricelist - PH5806-K8S High-temperature PH Sensor – BOQU
Features 1. It adopts heat-resisting gel dielectric and solid dielectric double liquid junction structure; in the circumstances when the electrode is not connected to the back pressure, the withstand pressure is 0.4MPa. It can be directly used for l30℃ sterilization. 2. There is no need for additional dielectric and there is a little amount of maintenance. 3. It adopts K8S and PGl3.5 thread socket, which can be replaced by any overseas electrode. 4. For the electrode length, there are 120, 15...
