Featured
-
China Wholesale Ph Conductivity Meter Manufacturers Pricelist - PH5803-K8S Industrial ORP Sensor – BOQU
Features 1. It adopts heat-resisting gel dielectric and solid dielectric double liquid junction structure; in the circumstances when the electrode is not connected to the back pressure, the withstand pressure is 0~6Bar. It can be directly used for l30℃ sterilization. 2. There is no need for additional dielectric and there is a little amount of maintenance. 3. It adopts S8 or K8S and PGl3.5 thread socket, which can be replaced by any overseas electrode. -
China Wholesale Small Ph Sensor Manufacturers Pricelist - PH8012 Industrial Waste Water PH Sensor – BOQU
Model No.: PH8012 Measuring range: 0-14pH Temperature range:0-60℃ Compressive strength:0.6MPa Slope: ≥96％ Zero point potential: E0=7PH±0.3 Internal impedance: 150-250 MΩ (25℃) Profile: 3-in-1Electrode (Integrating the temperature compensation and the solution grounding) Installation size: Upper and Lower 3/4NPT Pipe Thread Connection: Low-noise cable goes out directly. Application: Applicable to various industrial sewages, environmental protection and water treatment. ... -
Wholesale China Ph And Alkalinity Meter Suppliers Factories - PH8083A&AH Industrial ORP Sensor – BOQU
Features ● It adopts gel or solid electrolyte, resisting pressure and helping reduce resistance; low resistance sensitive membrane. ● Waterproof connector can be used for pure water testing. ●There is no need for additional dielectric and there is a little amount of maintenance. ● It adopts BNC connector, which can be replaced by any electrode from abroad. It can be used in conjunction with 361 L stainless steel sheath or PPS sheath. -
Wholesale China Ph Test Meter Factory Suppliers - BH-485-pH Digital pH Sensor – BOQU
Characters · The characteristics of industrial sewage electrode, can work stably for a long time. · Built in temperature sensor, real-time temperature compensation. · RS485 signal output, strong anti-interference ability, the output range of up to 500m. · Using the standard Modbus RTU (485) communication protocol. · The operation is simple, the electrode parameters can be achieved by remote settings, remote calibration of electrode. · 24V DC power supply. -
China Wholesale Thermal Conductivity Probe Manufacturers Pricelist - DDG-30.0 Industrial Conductivity Sensor – BOQU
The conductivity industrial series of electrodes are specially used for the measurement of conductivity value of pure water, ultra-pure water, water treatment, etc. It is especially suitable for conductivity measurement in the thermal power plant and the water treatment industry. It is featured by the double-cylinder structure and the titanium alloy material, which can be naturally oxidized to form the chemical passivation. Its anti-infiltration conductive surface is resistant to all kinds of... -
China Wholesale Silicate Meter Factory Suppliers - GSGG-5089Pro Industrial Silicate Analyzer – BOQU
1. Low detection limit, very suitable for power plant water feed, saturated steam and superheated steam silicon content detection and control; 2. Long life light source, using cold monochrome light source; 3. Historical curve recording function, can store 30 days of data; 4. Automatic calibration function, period arbitrarily set; 5. Support multi-channel measurements in water samples, optional 1-6 channels; 6. Achieve a maintenance-free, except adding reagents, guide standards. -
Wholesale China Ph And Orp Meter Suppliers Factories - PH5806-S8 High-temperature PH Sensor – BOQU
Features 1. It adopts heat-resisting gel dielectric and solid dielectric double liquid junction structure; in the circumstances when the electrode is not connected to the back pressure, the withstand pressure is 0.4MPa. It can be directly used for l30℃ sterilization. 2. There is no need for additional dielectric and there is a little amount of maintenance. 3. It adopts K8S and PGl3.5 thread socket, which can be replaced by any overseas electrode. 4. For the electrode length, there are 120, 15... -
Wholesale China Pure Water Ph Sensor Quotes Manufacturer - ORP8083 Industrial ORP Sensor – BOQU
Features 1. It adopts the world-class solid dielectric and a large area of PTFE liquid for junction, difficult to block and easy to maintain. 2. Long-distance reference diffusion channel greatly extends the service life of electrodes in the harsh environment. 3. There is no need for additional dielectric and there is a little amount of maintenance. 4. High accuracy, fast response and good repeatability.
