Featured
-
China Wholesale Water Treatment Ph Sensor Suppliers Factories - CPH800&CPH600&GPE100 Industrial Waste&Pure Water PH Sensor – BOQU
Features 1. It adopts gel dielectric and solid dielectric double liquid junction structure, which can be directly used in the chemical process of the high-viscosity suspension, emulsion, the liquid containing protein and other liquids, which are easy to choke. 2. There is no need for additional dielectric and there is a little amount of maintenance. With water resistant connector, can be used for pure water monitoring. 3. It adopts S7 and PG13.5 connector, which can be replaced by any electro... -
Wholesale China Online Conductivity Meter Suppliers Manufacturers Pricelist - BH-485-DD-0.1 Digital Conductivity Sensor – BOQU
Features · Can work stably for a long time. · Built in temperature sensor, real-time temperature compensation. · RS485 signal output, strong anti-interference ability, the output range of up to 500m. · Using the standard Modbus RTU (485) communication protocol. · The operation is simple, the electrode parameters can be achieved by remote settings, remote calibration of electrode. · 24V DC power supply. -
Wholesale China Online Sodium Meter Quotes Manufacturer - DCSG-2099 Multi-parameter Online Analyzer – BOQU
Features Menu:menu structure, similar to computer operation, simple, prompt, easy use. Multi-parameter display in one screen: Conductivity, temperature, pH, ORP, dissolved oxygen, hypochlorite acid or chlorine on the same screen. You can also switch the display 4 ~ 20mA current signal for each parameter value and the corresponding electrode. Current isolated output: six independent 4 ~ 20mA current, coupled with optical isolation technology, strong anti-jamming capability, remote transmission... -
China Wholesale Ph Meter Conductivity Meter Suppliers Factories - PH8083A&AH Industrial ORP Sensor – BOQU
Features ● It adopts gel or solid electrolyte, resisting pressure and helping reduce resistance; low resistance sensitive membrane. ● Waterproof connector can be used for pure water testing. ●There is no need for additional dielectric and there is a little amount of maintenance. ● It adopts BNC connector, which can be replaced by any electrode from abroad. It can be used in conjunction with 361 L stainless steel sheath or PPS sheath. -
Wholesale China Phosphate Analyzer Quotes Manufacturer - BH-485-PH8012 Digital pH Sensor – BOQU
Characters · The characteristics of industrial sewage electrode, can work stably for a long time. · Built in temperature sensor, real-time temperature compensation. · RS485 signal output, strong anti-interference ability, the output range of up to 500m. · Using the standard Modbus RTU (485) communication protocol. · The operation is simple, the electrode parameters can be achieved by remote settings, remote calibration of electrode. · 24V DC power supply. -
Wholesale China Inline Orp Meter Suppliers Factories - E-301 Laboratory pH Sensor – BOQU
Model number E-301 PC housing, dismountable protective hat convenient for clean, no need to add KCL solution General information: Measuring range 0-14 .0 PH Resolution 0.1PH Accuracy ± 0.1PH working temperature 0 – 45°C weight 110g Dimensions 12×120 mm Payment Information Payment method T/T, Western Union, MoneyGram MOQ: 10 Dropship Available Warranty 1 Year Lead time Sample available any time, bulk... -
Wholesale China Residual Chlorine Meter Factory Suppliers - CLG-2059S/P Online Residual Chlorine Analyzer – BOQU
Monitoring of chlorine disinfection treatment water such as swimming pool water, drinking water, pipe network and secondary water supply etc. Model CLG-2059S/P Measurement configuration Temp/residual chlorine Measuring range Temperature 0-60℃ Residual chlorine analyzer 0-20mg/L（pH：5.5-10.5） Resolution and accuracy Temperature Resolution：0.1℃ Accuracy：±0.5℃ Residual chlorine analyzer Resolution：0.01mg/L Accuracy：±2% FS Communication Interface 4-20mA /RS485... -
Wholesale China Swimming Pool Ph Monitor Quotes Manufacturer - PH5806 High Temperature PH Sensor – BOQU
Features 1. It adopts heat-resisting gel dielectric and solid dielectric double liquid junction structure; in the circumstances when the electrode is not connected to the back pressure, the withstand pressure is 0~6Bar. It can be directly used for l30℃ sterilization. 2. There is no need for additional dielectric and there is a little amount of maintenance. 3. It adopts S8 and PGl3.5 thread socket, which can be replaced by any overseas electrode. 4. For the electrode length, there are 120, 150...
