Featured
-
Wholesale China optical do sensor Suppliers Factories - TC100/500/3000 Industrial Turbidity Sensor – BOQU
Features 1. Check and clean window every month, with automatic cleaning brush, brush a half hour. 2. Adopt sapphire glass realize easy maintain, when cleaning adopt scratch-resistant sapphire glass, don’t worry about the wear surface of window. 3. Compact, not fussy installation place, just put in to can complete the installation. 4. Continuous measurement can be achieved, built-in 4~20mA analog output, can transmit data to the various machine according to the need. 5. Wide measurement ... -
Wholesale China Submersible Ph Sensor Quotes Manufacturer - PH8012 Industrial Waste Water PH Sensor – BOQU
Model No.: PH8012 Measuring range: 0-14pH Temperature range:0-60℃ Compressive strength:0.6MPa Slope: ≥96％ Zero point potential: E0=7PH±0.3 Internal impedance: 150-250 MΩ (25℃) Profile: 3-in-1Electrode (Integrating the temperature compensation and the solution grounding) Installation size: Upper and Lower 3/4NPT Pipe Thread Connection: Low-noise cable goes out directly. Application: Applicable to various industrial sewages, environmental protection and water treatment. ... -
China Wholesale Water Ph Controller Quotes Manufacturer - PH8083A&AH Industrial ORP Sensor – BOQU
Features ● It adopts gel or solid electrolyte, resisting pressure and helping reduce resistance; low resistance sensitive membrane. ● Waterproof connector can be used for pure water testing. ●There is no need for additional dielectric and there is a little amount of maintenance. ● It adopts BNC connector, which can be replaced by any electrode from abroad. It can be used in conjunction with 361 L stainless steel sheath or PPS sheath. -
China Wholesale Sensor Ph Manufacturers Pricelist - BH-485-ORP Digital ORP Sensor – BOQU
BH-485 Series of online ORP electrode, adopt electrode measuring method, and realizes the automatic temperature compensation in the interior of the electrodes, Automatic identification of standard solution. Electrode adopt imported composite electrode, high precision, good stability,long lifetime, with rapid response, low maintenance cost, real-time online measurement characters etc.. The electrode using standard Modbus RTU (485) communication protocol, 24V DC power supply, four wire mode can... -
Wholesale China Dissolved Oxygen And Temperature Meter Manufacturers Pricelist - DOG-2092 Industrial Dissolved Oxygen Meter – BOQU
Features DOG-2092 is a precision instrument used for testing and control of dissolved oxygen. The instrument has all the parameters for microcomputer storing, caluating and compensating of the related measured dissolved oxygen values; DOG-2092 can set the relevant data, such as elevation and salinity. It is also featured by complete functions, stable performance and simple operation. It is an ideal instrument in the field of the dissolved oxygen test and control. DOG-2092 adopts the backlit L... -
China Wholesale Ph Test Meter Factory Suppliers - ORP-2096 Industrial Oxidation Reduction Potential (ORP) Meter – BOQU
Features LCD display, high-performance CPU chip, high-precision AD conversion technology and SMT chip technology, multi-parameter, temperature compensation, automatic range conversion, high precision and repeatability The current output and alarm relay adopt optoelectronic isolating technology, strong interference immunity and the capacity of long-distance transmission. Isolated alarming signal output, discretionary setting of upper and lower thresholds for alarming, and lagged cancellation o... -
China Wholesale Dissolved Oxygen Portable Meter Factory Suppliers - DOG-2082S Digital Dissolved Oxygen Meter – BOQU
The transmitter can be used to display data measured by the sensor, so the user can get the 4-20mA analog output by transmitter’s interface configuration and calibration. And it can make relay control, digital communications, and other functions a reality. The product is widely used in sewage plant, water plant, water station, surface water, farming, industry and other fields. -
Wholesale China Residual Chlorine Sensor Quotes Manufacturer - CLG-6059T Online Residual Chlorine Analyzer – BOQU
Monitoring of chlorine disinfection treatment water such as swimming pool water, drinking water, pipe network and secondary water supply etc. Measurement configuration PH/Temp/residual chlorine Measuring range Temperature 0-60℃ pH 0-14pH Residual chlorine analyzer 0-20mg/L（pH：5.5-10.5） Resolution and accuracy Temperature Resolution：0.1℃ Accuracy：±0.5℃ pH Resolution：0.01pH Accuracy：±0.1 pH Residual chlorine analyzer Resolution：0.01mg/L Accuracy：±2% FS...
