Featured
-
Wholesale China ION (F-,CL-,Ca2+,NO3-,NH4+ etc) Suppliers Factories - PFG-3085 Online Potassium Ion Meter – BOQU
1) The ion instrument are used in industrial measuring of the temperature and ion, such as Waste water treatment, environmental monitoring, electroplate factory, etc. 2) It can be panel, wall or pipe mounted. 3) The ion meter provides two current outputs. The maximum load is 500 Ohm. 4) It provides 3 relays. It can pass though a maximum of 5 Amps at 250 VAC or 5 Amps at 30VDC 5) It has data logger function and record 500 000 times data. 6) it’s suitable for F-,Cl-,Mg2+,Ca2+,NO3-,NH+ etc... -
China Wholesale Online Ph Probes Factory Suppliers - PH5806-VP High Temperature 130℃ PH Sensor – BOQU
Features 1. It adopts heat-resisting gel dielectric and solid dielectric double liquid junction structure; in the circumstances when the electrode is not connected to the back pressure, the withstand pressure is 0~6Bar. It can be directly used for l30℃ sterilization. 2. There is no need for additional dielectric and there is a little amount of maintenance. 3. It adopts VP and PGl3.5 thread socket, which can be replaced by any overseas electrode. 4. For the electrode length, there are 120, 150... -
Wholesale China Residual Chlorine Controller Factory Suppliers - CLG-6059T Online Residual Chlorine Analyzer – BOQU
Monitoring of chlorine disinfection treatment water such as swimming pool water, drinking water, pipe network and secondary water supply etc. Measurement configuration PH/Temp/residual chlorine Measuring range Temperature 0-60℃ pH 0-14pH Residual chlorine analyzer 0-20mg/L（pH：5.5-10.5） Resolution and accuracy Temperature Resolution：0.1℃ Accuracy：±0.5℃ pH Resolution：0.01pH Accuracy：±0.1 pH Residual chlorine analyzer Resolution：0.01mg/L Accuracy：±2% FS... -
China Wholesale Waste water Ph Probe Quotes Manufacturer - PH8011 Industrial Antimony PH Sensor – BOQU
Features 1. It adopts the world-class solid dielectric and a large area of PTFE liquid for junction, difficult to block and easy to maintain. 2. Long-distance reference diffusion channel greatly extends the service life of electrodes in the harsh environment. 3. There is no need for additional dielectric and there is a little amount of maintenance. 4. High accuracy, fast response and good repeatability. -
China Wholesale Inductvive Conductivity Meter Quotes Manufacturer - BH-485-DD-0.1 Digital Conductivity Sensor – BOQU
Features · Can work stably for a long time. · Built in temperature sensor, real-time temperature compensation. · RS485 signal output, strong anti-interference ability, the output range of up to 500m. · Using the standard Modbus RTU (485) communication protocol. · The operation is simple, the electrode parameters can be achieved by remote settings, remote calibration of electrode. · 24V DC power supply. -
Wholesale China Dissolved Oxygen Meter For Aquaculture Factory Suppliers - DOS-118F Lab Dissolved Oxygen Sensor – BOQU
Measuring range 0-20mg/L Measured water temperature 0-60℃ Electrode shell material PVC Temperature compensation resistor 2.252K, 10K, 22K, Ptl00, Pt1000 Sensor life >1years Cable length 1 m or 2m(double shielded) Detection lower limit 0.1 mg/L (ppm) (20℃) Measurement upper limit 20mg/L(ppm) Response time ≤l min(90％, 20℃) Polarization time >2min Minimum flow rate 2.5cm/s Drift <3%/month Measurement error <±1 PPM Air current 80-100nA (25℃) Polarizat... -
Wholesale China Orp Portable Meter Quotes Manufacturer - BH-485-PH8012 Digital pH Sensor – BOQU
Characters · The characteristics of industrial sewage electrode, can work stably for a long time. · Built in temperature sensor, real-time temperature compensation. · RS485 signal output, strong anti-interference ability, the output range of up to 500m. · Using the standard Modbus RTU (485) communication protocol. · The operation is simple, the electrode parameters can be achieved by remote settings, remote calibration of electrode. · 24V DC power supply. -
China Wholesale Conductivity Meter For Tap Water Quotes Manufacturer - DDG-0.1F&0.01F Industrial Tri-clamp Conductivity Sensor – BOQU
The conductivity industrial series of electrodes are specially used for the measurement of conductivity value of pure water, ultra-pure water, water treatment, etc. It is especially suitable for conductivity measurement in the thermal power plant and the water treatment industry. It is featured by the double-cylinder structure and the titanium alloy material, which can be naturally oxidized to form the chemical passivation. Its anti-infiltration conductive surface is resistant to all kinds of...
