Featured
-
China Wholesale Mini Ph Probe Factory Suppliers - PHG-3081 Industrial PH Meter – BOQU
Features Intelligent: This industrial PH meter adopts high-precision AD conversion and single chip microcomputer processing technologies and can be used for the measurement of the PH values and temperature, automatic temperature compensation and self-checking. Reliability: All the components are arranged on one circuit board. No complicated functional switch, adjusting knob or potentiometer arranged on this instrument. Double high impedance input: The latest components are adopted; The impeda... -
Wholesale China Residual Chlorine Analyzer Quotes Manufacturer - CLG-2059S/P Online Residual Chlorine Analyzer – BOQU
Monitoring of chlorine disinfection treatment water such as swimming pool water, drinking water, pipe network and secondary water supply etc. Model CLG-2059S/P Measurement configuration Temp/residual chlorine Measuring range Temperature 0-60℃ Residual chlorine analyzer 0-20mg/L（pH：5.5-10.5） Resolution and accuracy Temperature Resolution：0.1℃ Accuracy：±0.5℃ Residual chlorine analyzer Resolution：0.01mg/L Accuracy：±2% FS Communication Interface 4-20mA /RS485... -
China Wholesale Laboratory Conductivity Meter Manufacturers Pricelist - DDS-1706 Laboratory Conductivity Meter – BOQU
DDS-1706 is an improved conductivity meter; based on DDS-307 on the market, it is added with the automatic temperature compensation function, with high price-performance ratio. It can be widely used for continuous monitoring of conductivity values of the solutions in thermal power plants, chemical fertilizer, metallurgy, environmental protection, pharmaceutical industry, biochemical industry, foodstuff and running water. -
China Wholesale Turbidity Meter&Sensor Suppliers Factories - ZDYG-2088-01QX Digital Turbidity Sensor – BOQU
Measurement principle ZDYG-2088-01QX turbidity sensor light scattering method based on combination of infrared absorption, infrared light emitted by the light source after the scattering of turbidity in the sample. Finally, by the photodetector conversion value of electrical signals, and obtaining the turbidity of the sample after the analog and digital signal processing. -
Wholesale China Ph Meter Manufacturers Pricelist - PH5803-K8S Industrial ORP Sensor – BOQU
Features 1. It adopts heat-resisting gel dielectric and solid dielectric double liquid junction structure; in the circumstances when the electrode is not connected to the back pressure, the withstand pressure is 0~6Bar. It can be directly used for l30℃ sterilization. 2. There is no need for additional dielectric and there is a little amount of maintenance. 3. It adopts S8 or K8S and PGl3.5 thread socket, which can be replaced by any overseas electrode. -
Wholesale China Ph Meter Transmitter Quotes Manufacturer - Online pH&ORP Sensor – BOQU
BH-485 Series of online ORP electrode, adopt electrode measuring method, and realizes the automatic temperature compensation in the interior of the electrodes, Automatic identification of standard solution. Electrode adopt imported composite electrode, high precision, good stability,long lifetime, with rapid response, low maintenance cost, real-time online measurement characters etc.. The electrode using standard Modbus RTU (485) communication protocol, 24V DC power supply, four wire mode can... -
Wholesale China optical do sensor Suppliers Factories - TC100/500/3000 Industrial Turbidity Sensor – BOQU
Features 1. Check and clean window every month, with automatic cleaning brush, brush a half hour. 2. Adopt sapphire glass realize easy maintain, when cleaning adopt scratch-resistant sapphire glass, don’t worry about the wear surface of window. 3. Compact, not fussy installation place, just put in to can complete the installation. 4. Continuous measurement can be achieved, built-in 4~20mA analog output, can transmit data to the various machine according to the need. 5. Wide measurement ... -
China Wholesale Dissolved Oxygen Ph Meter Quotes Manufacturer - PH5803-K8S Industrial ORP Sensor – BOQU
Features 1. It adopts heat-resisting gel dielectric and solid dielectric double liquid junction structure; in the circumstances when the electrode is not connected to the back pressure, the withstand pressure is 0~6Bar. It can be directly used for l30℃ sterilization. 2. There is no need for additional dielectric and there is a little amount of maintenance. 3. It adopts S8 or K8S and PGl3.5 thread socket, which can be replaced by any overseas electrode.
