Featured
-
Wholesale China Laboraotory Orp Meter Quotes Manufacturer - PH5806-S8 High-temperature PH Sensor – BOQU
Features 1. It adopts heat-resisting gel dielectric and solid dielectric double liquid junction structure; in the circumstances when the electrode is not connected to the back pressure, the withstand pressure is 0.4MPa. It can be directly used for l30℃ sterilization. 2. There is no need for additional dielectric and there is a little amount of maintenance. 3. It adopts K8S and PGl3.5 thread socket, which can be replaced by any overseas electrode. 4. For the electrode length, there are 120, 15... -
Wholesale China High Quality Ph Meter Quotes Manufacturer - Online pH&ORP Sensor – BOQU
BH-485 Series of online ORP electrode, adopt electrode measuring method, and realizes the automatic temperature compensation in the interior of the electrodes, Automatic identification of standard solution. Electrode adopt imported composite electrode, high precision, good stability,long lifetime, with rapid response, low maintenance cost, real-time online measurement characters etc.. The electrode using standard Modbus RTU (485) communication protocol, 24V DC power supply, four wire mode can... -
China Wholesale Ph Sensor Probe China Suppliers Factories - PH8083A&AH Industrial ORP Sensor – BOQU
Features ● It adopts gel or solid electrolyte, resisting pressure and helping reduce resistance; low resistance sensitive membrane. ● Waterproof connector can be used for pure water testing. ●There is no need for additional dielectric and there is a little amount of maintenance. ● It adopts BNC connector, which can be replaced by any electrode from abroad. It can be used in conjunction with 361 L stainless steel sheath or PPS sheath. -
Wholesale China Free Chlorine Sensor Manufacturers Pricelist - TBG-2088S/P Online Turbidity Analyzer – BOQU
Application field Monitoring of chlorine disinfection treatment water such as swimming pool water, drinking water, pipe network and secondary water supply etc. -
Wholesale China Benchtop Multiparameter Ph Meter Suppliers Factories - PH5806-VP High Temperature PH Sensor – BOQU
Features 1. It adopts heat-resisting gel dielectric and solid dielectric double liquid junction structure; in the circumstances when the electrode is not connected to the back pressure, the withstand pressure is 0~6Bar. It can be directly used for l30℃ sterilization. 2. There is no need for additional dielectric and there is a little amount of maintenance. 3. It adopts VP and PGl3.5 thread socket, which can be replaced by any overseas electrode. 4. For the electrode length, there are 120, 150... -
Wholesale China dissolved oxygen electrode Factory Suppliers - DOS-118F Lab Dissolved Oxygen Sensor – BOQU
Measuring range 0-20mg/L Measured water temperature 0-60℃ Electrode shell material PVC Temperature compensation resistor 2.252K, 10K, 22K, Ptl00, Pt1000 Sensor life >1years Cable length 1 m or 2m(double shielded) Detection lower limit 0.1 mg/L (ppm) (20℃) Measurement upper limit 20mg/L(ppm) Response time ≤l min(90％, 20℃) Polarization time >2min Minimum flow rate 2.5cm/s Drift <3%/month Measurement error <±1 PPM Air current 80-100nA (25℃) Polarizat... -
Wholesale China Ph Conductivity Orp Meter Manufacturers Pricelist - ORP-2096 Industrial Oxidation Reduction Potential (ORP) Meter – BOQU
Features LCD display, high-performance CPU chip, high-precision AD conversion technology and SMT chip technology, multi-parameter, temperature compensation, automatic range conversion, high precision and repeatability The current output and alarm relay adopt optoelectronic isolating technology, strong interference immunity and the capacity of long-distance transmission. Isolated alarming signal output, discretionary setting of upper and lower thresholds for alarming, and lagged cancellation o... -
China Wholesale Ec Sensor Price Manufacturers Pricelist - ZDYG-2088-01QX Digital Turbidity Sensor – BOQU
Measurement principle ZDYG-2088-01QX turbidity sensor light scattering method based on combination of infrared absorption, infrared light emitted by the light source after the scattering of turbidity in the sample. Finally, by the photodetector conversion value of electrical signals, and obtaining the turbidity of the sample after the analog and digital signal processing.
