Industrial Digital Conductivity Meter

Short Description:

★ Model No: DDG-2080S

★ Protocol: Modbus RTU RS485 or 4-20mA 

★ Measure Parameters: Conductivity, Resistivity, Salinity, TDS,Temperature

★ Application: power plant, fermentation, tap water, industrial water

★ Features: IP65 protection grade, 90-260VAC wide power supply


  • facebook
  • linkedin
  • sns02
  • sns04

Product Detail

User Manual

Introduction

Instruments are used in industrial measuring of the temperature, conductivity, Resistivity, salinity and total dissolved solids, such as waste water treatment, environmental monitoring, pure water, sea farming, food production process, etc.

Technical Indexes

Specifications Details
Name Online Conductivity Meter
Shell ABS
Power supply 90 – 260V AC 50/60Hz
Current output 2 roads of 4-20mA  (Conductivity .temperature)
Relay 5A/250V AC      5A/30V DC
Overall dimension 144×144×104mm
Weight 0.9kg
Communication Interface Modbus RTU
Measure range Conductivity: 0~2000000.00 us/cm(0~2000.00 ms/cm)Salinity: 0~80.00 ppt

TDS: 0~9999.00 mg/L(ppm)

Resistivity: 0~20.00MΩ

Temperature: -40.0~130.0℃

Accuracy  2%±0.5℃
Protection IP65

 

What is Conductivity?

Conductivity is a measure of water’s capability to pass electrical flow. This ability is directly related to the concentration of ions in the water
1. These conductive ions come from dissolved salts and inorganic materials such as alkalis, chlorides, sulfides and carbonate compounds
2. Compounds that dissolve into ions are also known as electrolytes 40. The more ions that are present, the higher the conductivity of water. Likewise, the fewer ions that are in the water, the less conductive it is. Distilled or deionized water can act as an insulator due to its very low (if not negligible) conductivity value 2. Sea water, on the other hand, has a very high conductivity.

Ions conduct electricity due to their positive and negative charges
When electrolytes dissolve in water, they split into positively charged (cation) and negatively charged (anion) particles. As the dissolved substances split in water, the concentrations of each positive and negative charge remain equal. This means that even though the conductivity of water increases with added ions, it remains electrically neutral 


  • Previous:
  • Next:

  • DDG-2080S user manual

  • Write your message here and send it to us