Wholesale China Water Dissolved Oxygen Sensor Factory Suppliers - DOG-208F Industrial Dissolved Oxygen Sensor – BOQU

Short Description:

Product Detail

Feedback (2)

We know that we only thrive if we can easily guarantee our combined cost competiveness and high-quality advantageous at the same time for Optical Dissolved Oxygen Meter , Handheld Conductivity Meter , Dissolved Oxygen Conductivity Meter , To provide customers with excellent equipment and services, and constantly develop new machine is our company's business objectives. We look forward to your cooperation.

Wholesale China Water Dissolved Oxygen Sensor Factory Suppliers - DOG-208F Industrial Dissolved Oxygen Sensor – BOQU Detail:

DOG-208F Dissolved Oxygen Electrode applicable for Polarography Principle

With platinum (Pt) as cathode and Ag / AgCl as anode

The electrolyte is 0.1 M potassium chloride (KCI).

The silicone rubber permeable membrane imported from U.S. serves as the permeable

membrane.

It has silicone rubber and steel gauze.

It is featured by collision resistance, corrosion resistance, high.temperature resistance, shape

retention and other performances

Measuring range: 0-100ug/L 0-20mg/L

Electrode material: 316L stainless steel

Temperature compensation resistor: 2.252K 22K Ptl00 Ptl000 etc

Sensor life: >3 years

Cable length: 5m (double shielded)

Detection lower Limit: 0.1ug/L(ppb)(20℃)

Measurement upper limit: 20mg/l(ppm)

Response time: ≤3min(90％, 20℃)

Polarization time: >8h

Minimum flow rate: 5cm/s; 515 L/h

Drift: <3%/month

Measurement error: <±1 ppb

Air current: 50-80nA Note: Maximum current 20-25 uA

Polarization voltage: 0.7V

Zero Oxygen: <5ppb(60min)

Calibration intervals: >60 days

Measured water temperature:0~60℃

Measuring range: 0-100ug/L 0-20mg/L

Electrode material: 316L stainless steel

Temperature compensation resistor: 2.252K 22K Ptl00 Ptl000 etc

Sensor life: >3 years

Cable length: 5m (double shielded)

Detection lower Limit: 0.1ug/L(ppb)(20℃)

Measurement upper limit: 20mg/l(ppm)

Response time: ≤3min(90％, 20℃)

Polarization time: >8h

Minimum flow rate: 5cm/s; 515 L/h

Drift: <3%/month

Measurement error: <±1 ppb

Air current: 50-80nA Note: Maximum current 20-25 uA

Polarization voltage: 0.7V

Zero Oxygen: <5ppb(60min)

Calibration intervals: >60 days

Measured water temperature:0~60℃

Applied to thermal power plants, power plant desalted water,.

boiler feed water etc places of trace oxygen content.

Product detail pictures:

Related Product Guide:

Assume full responsibility to satisfy all needs of our clients; achieve continual advancements by endorsing the expansion of our purchasers; turn into the final permanent cooperative partner of clientele and maximize the interests of clients for Wholesale China Water Dissolved Oxygen Sensor Factory Suppliers - DOG-208F Industrial Dissolved Oxygen Sensor – BOQU , The product will supply to all over the world, such as: Croatia, Cannes, Libya, Since its foundation , the company keeps living up to the belief of "honest selling , best quality , people-orientation and benefits to customers. " We're doing everything to supply our customers with best services and best solutions . We promise that we are going to be responsible all the way to the end once our services begin.

Chemical Oxygen Demand Analyzer

Digital Dissolved Oxygen Meter

Dissolved Oxygen Controller

Dissolved Oxygen Do Meter

Dissolved Oxygen Meter Waste water

dissolved oxygen sensor

Dissolved Oxygen Sensor Price

Dissolved Oxygen Water Quality Meter

Portable Dissolved Oxygen Meter Ppb

The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.