Wholesale China Ph Conductivity Meter Manufacturer Manufacturers Pricelist - PH8012 Industrial Waste Water PH Sensor – BOQU Detail:
| Model No.: PH8012 |
| Measuring range: 0-14pH |
| Temperature range:0-60℃ |
| Compressive strength:0.6MPa |
| Slope: ≥96％ |
| Zero point potential: E0=7PH±0.3 |
| Internal impedance: 150-250 MΩ (25℃) |
| Profile: 3-in-1Electrode (Integrating the temperature compensation and the solution grounding) |
| Installation size: Upper and Lower 3/4NPT Pipe Thread |
| Connection: Low-noise cable goes out directly. |
| Application: Applicable to various industrial sewages, environmental protection and water treatment. |
| ●It adopts the world-class solid dielectric and a large area of PTFE liquid for junction, non-block and easy |
| maintenance. |
| ● Long-distance reference diffusion channel greatly extends the service life of electrodes in the harsh environment |
| ● It adopts PPS/PC casing and the upper and lower 3/4NPT pipe thread, so it is easy for installation and there is |
| no need of the jacket, thus saving the installation cost. |
|
● The electrode adopts the high-quality low-noise cable, which makes the signal output length more than 20 |
| meters free of interference. |
| ● There is no need for additional dielectric and there is a little amount of maintenance. |
| ● High measurement accuracy, fast responsing and good repeatability. |
| ● Reference electrode with silver ions Ag/AgCL |
| ● Proper operation shall make service life longer. |
| ● It can be installed in the reaction tank or pipe laterally or vertically. |
| ● The electrode can be replaced by a similar electrode made by any other country. |
Product detail pictures:
Related Product Guide:
All we do is usually connected with our tenet " Customer to start with, Rely on initial, devoting on the food packaging and environmental protection for Wholesale China Ph Conductivity Meter Manufacturer Manufacturers Pricelist - PH8012 Industrial Waste Water PH Sensor – BOQU , The product will supply to all over the world, such as: Brazil, Jamaica, Swiss, We always insist on the management tenet of "Quality is first, Technology is basis, Honesty and Innovation".We are able to develop new products continuously to a higher level to satisfy different needs of customers.
By Adam from Marseille - 2018.07.27 12:26
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Brook from Doha - 2018.10.09 19:07
Write your message here and send it to us
