Wholesale China Dissolved Oxygen Temperature Meter Factory Suppliers - DOG-208F Industrial Dissolved Oxygen Sensor – BOQU

Short Description:

Product Detail

Feedback (2)

That has a sound small business credit, great after-sales service and modern production facilities, we've earned an outstanding standing amid our buyers across the earth for Laboratory Ph Sensor , Conductivity Meter Probe , Acid Alkaline Concentration、Acid Alkaline Concentration Meter , We sincerely hope to serve you and your business with a good start. If there is anything we can do for You, we shall be more than pleased to do so. Welcome to our factory for visit.

Wholesale China Dissolved Oxygen Temperature Meter Factory Suppliers - DOG-208F Industrial Dissolved Oxygen Sensor – BOQU Detail:

DOG-208F Dissolved Oxygen Electrode applicable for Polarography Principle

With platinum (Pt) as cathode and Ag / AgCl as anode

The electrolyte is 0.1 M potassium chloride (KCI).

The silicone rubber permeable membrane imported from U.S. serves as the permeable

membrane.

It has silicone rubber and steel gauze.

It is featured by collision resistance, corrosion resistance, high.temperature resistance, shape

retention and other performances

Measuring range: 0-100ug/L 0-20mg/L

Electrode material: 316L stainless steel

Temperature compensation resistor: 2.252K 22K Ptl00 Ptl000 etc

Sensor life: >3 years

Cable length: 5m (double shielded)

Detection lower Limit: 0.1ug/L(ppb)(20℃)

Measurement upper limit: 20mg/l(ppm)

Response time: ≤3min(90％, 20℃)

Polarization time: >8h

Minimum flow rate: 5cm/s; 515 L/h

Drift: <3%/month

Measurement error: <±1 ppb

Air current: 50-80nA Note: Maximum current 20-25 uA

Polarization voltage: 0.7V

Zero Oxygen: <5ppb(60min)

Calibration intervals: >60 days

Measured water temperature:0~60℃

Measuring range: 0-100ug/L 0-20mg/L

Electrode material: 316L stainless steel

Temperature compensation resistor: 2.252K 22K Ptl00 Ptl000 etc

Sensor life: >3 years

Cable length: 5m (double shielded)

Detection lower Limit: 0.1ug/L(ppb)(20℃)

Measurement upper limit: 20mg/l(ppm)

Response time: ≤3min(90％, 20℃)

Polarization time: >8h

Minimum flow rate: 5cm/s; 515 L/h

Drift: <3%/month

Measurement error: <±1 ppb

Air current: 50-80nA Note: Maximum current 20-25 uA

Polarization voltage: 0.7V

Zero Oxygen: <5ppb(60min)

Calibration intervals: >60 days

Measured water temperature:0~60℃

Applied to thermal power plants, power plant desalted water,.

boiler feed water etc places of trace oxygen content.

Product detail pictures:

Related Product Guide:

Assume full responsibility to satisfy all needs of our clients; achieve continual advancements by endorsing the expansion of our purchasers; turn into the final permanent cooperative partner of clientele and maximize the interests of clients for Wholesale China Dissolved Oxygen Temperature Meter Factory Suppliers - DOG-208F Industrial Dissolved Oxygen Sensor – BOQU , The product will supply to all over the world, such as: Nairobi, Johannesburg, belarus, Our products are mainly exported to Europe, Africa, America, the Middle East and Southeast Asia and other countries and regions. We have enjoyed a great reputation among our customers for quality products and good services.We would make friends with businessmen from at home and abroad, following the purpose of "Quality First, Reputation First, the Best Services."

Cheap Dissolved Oxygen Meter