Products
-
Up and down 3/4 threads Installation Conductivity Sensor
★ Model No:DDG-0.01/0.1/1.0
★ Measure range: 0.01-20uS/cm, 0-200μS/cm, 0-2000μS/cm
★ Type: Analog sensor, mV output
★Features: Up and down 3/4 threads
★Application: RO system, Hydroponic, water treatment
-
Dual Channel pH&DO Digital Module
★ Model No: BD120
★ Protocol:Modbus RTU
★ Power Supply: 24V DC
★Measure Parameters: pH,ORP, DO,Temperature
★Features:PH and dissolved oxygen measurement at the same time
★ Application: Waste water, High-temperature boiler water,Process water
-
Four-Electrode Conductivity Sensor
★ Model No:EC-A401
★ Measure range: 0-200ms/cm
★ Type: Analog sensor, mV output
★Features: Using four-electrode technology, the maintenance cycle is longer
-
DPD Colorimetry Chlorine Analyzer CLG-6059DPD
★ Model No: CLG-6059DPD
★Protocol: Modbus RTU RS485
★ Measurement principle: DPD colorimetry
★Measurement Range: 0-5.00mg/L(ppm)
★ Power Supply: 100-240VAC, 50/60Hz
-
Integrated Low Range Turbidity Sensor With Display
★ Model No: BH-485-TU
★ A continuous reading turbidity meter designed for low range turbidity monitoring
★ EPA principle 90-degree scattering method, specially used for low-range turbidity monitoring;
★ The data is stable and reproducible
★ Simple cleaning and maintenance;
★ Protocol: Modbus RTU RS485
★ Power Supply: DC24V(19-36V)
★ Application: surface water, tap water factory water, secondary water supply etc
-
Online Secondary Water Supply Turbidity Sensor
★ Model No: BH-485-ZD
★ A continuous reading turbidity meter designed for low range turbidity monitoring
★ The data is stable and reproducible
★ Easy to clean and maintain
★ Protocol: Modbus RTU RS485
★ Power Supply: DC24V(19-36V)
★ Application: surface water, tap water factory water, secondary water supply etc
-
Digital Drinking Water Turbidity Sensor
★ Model No: BH-485-TB
★ High performance: indication accuracy 2%, minimum detection limit 0.015NTU
★ Maintenance-free: intelligent sewage control, no manual maintenance
★ Small size: especially suitable for system set to make
★ Protocol: Modbus RTU RS485
★ Power Supply: DC24V(19-36V)
★ Application: surface water, tap water factory water, secondary water supply etc
-
Online Residual Chlorine Analyzer Used For Medical Wastewater
★ Model No: FLG-2058
★ Output: 4-20mA
★ Protocol: Modbus RTU RS485
★ Measure Parameters: Residual Chlorine/Chlorine Dioxide,Temperature
★ Power Supply: AC220V
★ Features: Easy to install, high precision and small in size.
★ Application: Medical wastewater, industrial wastewater etc