Featured
-
China Wholesale Tds Meter And Conductivity Meter Factory Suppliers - DDG-GYW Industrial Inductive Conductivity Sensor – BOQU
Features 1. Performance in harsh chemical environments is excellent, chemical resistant material manufactured by the electrode is not polarized interference, to avoid dirt, grime and even affect fouling layer covering phenomena such as very poor, simple and easy to install so it’s a very wide range of applications. Design electrodes applied to a high concentration of acids (such as fuming sulfuric acid) environment. 2. English acid concentration meter use, high accuracy, and high stabil... -
China Wholesale Water Turbidity Meter Suppliers Factories - TC100/500/3000 Industrial Turbidity Sensor – BOQU
Features 1. Check and clean window every month, with automatic cleaning brush, brush a half hour. 2. Adopt sapphire glass realize easy maintain, when cleaning adopt scratch-resistant sapphire glass, don’t worry about the wear surface of window. 3. Compact, not fussy installation place, just put in to can complete the installation. 4. Continuous measurement can be achieved, built-in 4~20mA analog output, can transmit data to the various machine according to the need. 5. Wide measurement ... -
China Wholesale Polarographic Dissolved Oxygen Sensor Factory Suppliers - PH5806-VP High Temperature PH Sensor – BOQU
Features 1. It adopts heat-resisting gel dielectric and solid dielectric double liquid junction structure; in the circumstances when the electrode is not connected to the back pressure, the withstand pressure is 0~6Bar. It can be directly used for l30℃ sterilization. 2. There is no need for additional dielectric and there is a little amount of maintenance. 3. It adopts VP and PGl3.5 thread socket, which can be replaced by any overseas electrode. 4. For the electrode length, there are 120, 150... -
China Wholesale Industrial Ph Electrode Suppliers Factories - PH5803-K8S Industrial ORP Sensor – BOQU
Features 1. It adopts heat-resisting gel dielectric and solid dielectric double liquid junction structure; in the circumstances when the electrode is not connected to the back pressure, the withstand pressure is 0~6Bar. It can be directly used for l30℃ sterilization. 2. There is no need for additional dielectric and there is a little amount of maintenance. 3. It adopts S8 or K8S and PGl3.5 thread socket, which can be replaced by any overseas electrode. -
Wholesale China Handheld Conductivity Meter Quotes Manufacturer - BH-485-DD-0.1 Digital Conductivity Sensor – BOQU
Features · Can work stably for a long time. · Built in temperature sensor, real-time temperature compensation. · RS485 signal output, strong anti-interference ability, the output range of up to 500m. · Using the standard Modbus RTU (485) communication protocol. · The operation is simple, the electrode parameters can be achieved by remote settings, remote calibration of electrode. · 24V DC power supply. -
Wholesale China Benchtop Multiparameter Ph Meter Quotes Manufacturer - PH5803-K8S Industrial ORP Sensor – BOQU
Features 1. It adopts heat-resisting gel dielectric and solid dielectric double liquid junction structure; in the circumstances when the electrode is not connected to the back pressure, the withstand pressure is 0~6Bar. It can be directly used for l30℃ sterilization. 2. There is no need for additional dielectric and there is a little amount of maintenance. 3. It adopts S8 or K8S and PGl3.5 thread socket, which can be replaced by any overseas electrode. -
China Wholesale Online Cod Analyzer Wastewater Quotes Manufacturer - TPG-3030 Industrial Total Phosphorus Analyzer – BOQU
The sample to be tested does not require any pretreatment. The water sample riser is directly inserted into the system water sample, and the total phosphorus concentration can be measured. The maximum measurement range of this equipment is 0.1~500mg/L TP. This method is mainly used for on-line automatic monitoring of total phosphorus concentration of waste (sewage) water discharge point source, surface water, etc. -
Wholesale China Chemical Conductivity Sensor Factory Suppliers - DDG-0.01 Industrial Conductivity Electrode – BOQU
1. Constant of electrode: 0.01 2. Compressive strength: 0.6MPa 3. Measuring range: 0.01-20uS/cm 4. Connection: hard tube, hose tube, flange installation 5. Material: 316L stainless steel or Titanium Alloy 6. Application: power plant, water treatment industry
