Featured
-
China Wholesale Portbale Conductivity Meter Manufacturers Pricelist - DDG-GY Industrial Inductive Conductivity/TDS Sensor – BOQU
Features 1. Performance in harsh chemical environments is excellent, chemical resistant material manufactured by the electrode is not polarized interference, to avoid dirt, grime and even affect fouling layer covering phenomena such as very poor, simple and easy to install so it’s a very wide range of applications. Design electrodes applied to a high concentration of acids (such as fuming sulfuric acid) environment. 2. English acid concentration meter use, high accuracy, and high stabil... -
China Wholesale Cod Sensor Factory Suppliers - TPG-3030 Industrial Total Phosphorus Analyzer – BOQU
The sample to be tested does not require any pretreatment. The water sample riser is directly inserted into the system water sample, and the total phosphorus concentration can be measured. The maximum measurement range of this equipment is 0.1~500mg/L TP. This method is mainly used for on-line automatic monitoring of total phosphorus concentration of waste (sewage) water discharge point source, surface water, etc. -
Wholesale China Acid Alkaline Concentration Manufacturers Pricelist - SJG-2083CS Online Acid Alkaline Concentration Meter – BOQU
1 Measurement range: HNO3: 0～25.00%;H2SO4: 0～25.00% 92%~100%;HCL: 0～20.00% 25～40.00)%;NaOH: 0～15.00% 20～40.00)%; 2 Accuracy: ±2%F.S; 3 Resolution: 0.01%; 4 Repeatability: ＜1%; 5 Temperature sensors: Pt1000 etc; 6 Temperature compensation range: 0～100℃; 7 Output: 4-20mA, RS485(optional) 8 Alarm relay: 2 normally open contacts are optional, AC220V 3A /DC30V 3A; 9 Power supply: AC(85～265) V Frequency ( 45～65)Hz; 10 Power: ≤15W; 11 Overall dimension: 144 mm×... -
Wholesale China Waste water Ph Probe Factory Suppliers - BH-485-PH8012 Digital pH Sensor – BOQU
Characters · The characteristics of industrial sewage electrode, can work stably for a long time. · Built in temperature sensor, real-time temperature compensation. · RS485 signal output, strong anti-interference ability, the output range of up to 500m. · Using the standard Modbus RTU (485) communication protocol. · The operation is simple, the electrode parameters can be achieved by remote settings, remote calibration of electrode. · 24V DC power supply. -
Wholesale China Residual Chlorine Electrode Quotes Manufacturer - CLG-2059S/P Online Residual Chlorine Analyzer – BOQU
Monitoring of chlorine disinfection treatment water such as swimming pool water, drinking water, pipe network and secondary water supply etc. Model CLG-2059S/P Measurement configuration Temp/residual chlorine Measuring range Temperature 0-60℃ Residual chlorine analyzer 0-20mg/L（pH：5.5-10.5） Resolution and accuracy Temperature Resolution：0.1℃ Accuracy：±0.5℃ Residual chlorine analyzer Resolution：0.01mg/L Accuracy：±2% FS Communication Interface 4-20mA /RS485... -
Wholesale China Online Sodium Meter Quotes Manufacturer - DCSG-2099 Multi-parameter Online Analyzer – BOQU
Features Menu:menu structure, similar to computer operation, simple, prompt, easy use. Multi-parameter display in one screen: Conductivity, temperature, pH, ORP, dissolved oxygen, hypochlorite acid or chlorine on the same screen. You can also switch the display 4 ~ 20mA current signal for each parameter value and the corresponding electrode. Current isolated output: six independent 4 ~ 20mA current, coupled with optical isolation technology, strong anti-jamming capability, remote transmission... -
Wholesale China Sodium Meter Suppliers Factories - DWG-5088Pro Industrial Online Sodium Meter – BOQU
LCD display in English, menu in English and notepad in English. High reliability: Single-board structure, touch keys, no switch knob or potentiometer. Rapid response, accurate measurement and high stability. Automatic constant-voltage constant-current liquid line system: Automatic compensation for flow and pressure of water sample. Alarm: Isolated alarm signal output, discretionary setting of upper and lower thresholds for alarming, and lagged cancellation of alarming. Network function: Isola... -
China Wholesale Conductivity Meter Electrode Factory Suppliers - DDG-10.0 Industrial Conductivity Sensor – BOQU
The conductivity industrial series of electrodes are specially used for the measurement of conductivity value of pure water, ultra-pure water, water treatment, etc. It is especially suitable for conductivity measurement in the thermal power plant and the water treatment industry. It is featured by the double-cylinder structure and the titanium alloy material, which can be naturally oxidized to form the chemical passivation. Its anti-infiltration conductive surface is resistant to all kinds of...
