Featured
-
China Wholesale Turbidity Sensor Suppliers Factories - TSG-2087S Industrial Total Suspended Solids (TSS) Meter – BOQU
The transmitter can be used to display data measured by the sensor, so the user can get the 4-20mA analog output by transmitter’s interface configuration and calibration. And it can make relay control, digital communications, and other functions a reality. The product is widely used in sewage plant, water plant, water station, surface water, farming, industry and other fields. -
GSGG-5089Pro Industrial Silicate Analyzer – BOQU
1. Low detection limit, very suitable for power plant water feed, saturated steam and superheated steam silicon content detection and control; 2. Long life light source, using cold monochrome light source; 3. Historical curve recording function, can store 30 days of data; 4. Automatic calibration function, period arbitrarily set; 5. Support multi-channel measurements in water samples, optional 1-6 channels; 6. Achieve a maintenance-free, except adding reagents, guide standards. -
China Wholesale Ntu Turbidity Meter Suppliers Factories - TCS-1000/TS-MX Industrial Sludge Concentration Sensor – BOQU
Features 1. Check and clean window every month, with automatic cleaning brush, brush a half hour. 2. Adopt sapphire glass realize easy maintain, when cleaning adopt scratch-resistant sapphire glass, don’t worry about the wear surface of window. 3. Compact, not fussy installation place, just put in to can complete the installation. 4. Continuous measurement can be achieved, built-in 4~20mA analog output, can transmit data to the various machine according to the need. 5. Wide measurement range,... -
China Wholesale Electrical Conductivity Meter Manufacturers Pricelist - DDG-GY Industrial Inductive Conductivity/TDS Sensor – BOQU
Features 1. Performance in harsh chemical environments is excellent, chemical resistant material manufactured by the electrode is not polarized interference, to avoid dirt, grime and even affect fouling layer covering phenomena such as very poor, simple and easy to install so it’s a very wide range of applications. Design electrodes applied to a high concentration of acids (such as fuming sulfuric acid) environment. 2. English acid concentration meter use, high accuracy, and high stabil... -
China Wholesale Ph And Ec Meter Quotes Manufacturer - PH8022 Industrial Pure Water PH Sensor – BOQU
Model No.: PH8022 Measuring range: 0-14pH Temperature range:0-60℃ Compressive strength:0.6MPa Slope: ≥96％ Zero point potential: E0=7PH±0.3 Internal impedance: ≤250 MΩ (25℃) Profile: 3-in-1Electrode (Integrating the temperature compensation and the solution grounding) Installation size: Upper and Lower 3/4NPT Pipe Thread Connection: Low-noise cable goes out directly. Application: Measurement of all kinds of pure water and high-purity water. ● It adopts the world-cla... -
China Wholesale Residual Chlorine Controller Factory Suppliers - CLG-2059S/P Online Residual Chlorine Analyzer – BOQU
Monitoring of chlorine disinfection treatment water such as swimming pool water, drinking water, pipe network and secondary water supply etc. Model CLG-2059S/P Measurement configuration Temp/residual chlorine Measuring range Temperature 0-60℃ Residual chlorine analyzer 0-20mg/L（pH：5.5-10.5） Resolution and accuracy Temperature Resolution：0.1℃ Accuracy：±0.5℃ Residual chlorine analyzer Resolution：0.01mg/L Accuracy：±2% FS Communication Interface 4-20mA /RS485... -
China Wholesale Bod Cod Meter Suppliers Factories - TPG-3030 Industrial Total Phosphorus Analyzer – BOQU
The sample to be tested does not require any pretreatment. The water sample riser is directly inserted into the system water sample, and the total phosphorus concentration can be measured. The maximum measurement range of this equipment is 0.1~500mg/L TP. This method is mainly used for on-line automatic monitoring of total phosphorus concentration of waste (sewage) water discharge point source, surface water, etc. -
Wholesale China Ec Probe Factory Suppliers - TSG-2087S Industrial Total Suspended Solids (TSS) Meter – BOQU
The transmitter can be used to display data measured by the sensor, so the user can get the 4-20mA analog output by transmitter’s interface configuration and calibration. And it can make relay control, digital communications, and other functions a reality. The product is widely used in sewage plant, water plant, water station, surface water, farming, industry and other fields.
