China Wholesale Waste water Dissolved Oxygen Meter Factory Suppliers - DOG-208F Industrial Dissolved Oxygen Sensor – BOQU

Short Description:

Product Detail

Feedback (2)

Our pursuit and company intention is usually to "Always fulfill our purchaser requirements". We go on to acquire and layout excellent high quality products for both our previous and new consumers and realize a win-win prospect for our customers too as us for Laboratory Conducitivity Meter , Ph Meter For Fermentation , Ph And Conductivity Meter Price , In case you are intrigued in any of our products or want to focus on a personalized get, please sense totally free to contact us. We're wanting ahead to forming successful enterprise relationships with new shoppers across the world during the in close proximity to long term.

China Wholesale Waste water Dissolved Oxygen Meter Factory Suppliers - DOG-208F Industrial Dissolved Oxygen Sensor – BOQU Detail:

DOG-208F Dissolved Oxygen Electrode applicable for Polarography Principle

With platinum (Pt) as cathode and Ag / AgCl as anode

The electrolyte is 0.1 M potassium chloride (KCI).

The silicone rubber permeable membrane imported from U.S. serves as the permeable

membrane.

It has silicone rubber and steel gauze.

It is featured by collision resistance, corrosion resistance, high.temperature resistance, shape

retention and other performances

Measuring range: 0-100ug/L 0-20mg/L

Electrode material: 316L stainless steel

Temperature compensation resistor: 2.252K 22K Ptl00 Ptl000 etc

Sensor life: >3 years

Cable length: 5m (double shielded)

Detection lower Limit: 0.1ug/L(ppb)(20℃)

Measurement upper limit: 20mg/l(ppm)

Response time: ≤3min(90％, 20℃)

Polarization time: >8h

Minimum flow rate: 5cm/s; 515 L/h

Drift: <3%/month

Measurement error: <±1 ppb

Air current: 50-80nA Note: Maximum current 20-25 uA

Polarization voltage: 0.7V

Zero Oxygen: <5ppb(60min)

Calibration intervals: >60 days

Measured water temperature:0~60℃

Measuring range: 0-100ug/L 0-20mg/L

Electrode material: 316L stainless steel

Temperature compensation resistor: 2.252K 22K Ptl00 Ptl000 etc

Sensor life: >3 years

Cable length: 5m (double shielded)

Detection lower Limit: 0.1ug/L(ppb)(20℃)

Measurement upper limit: 20mg/l(ppm)

Response time: ≤3min(90％, 20℃)

Polarization time: >8h

Minimum flow rate: 5cm/s; 515 L/h

Drift: <3%/month

Measurement error: <±1 ppb

Air current: 50-80nA Note: Maximum current 20-25 uA

Polarization voltage: 0.7V

Zero Oxygen: <5ppb(60min)

Calibration intervals: >60 days

Measured water temperature:0~60℃

Applied to thermal power plants, power plant desalted water,.

boiler feed water etc places of trace oxygen content.

Product detail pictures:

Related Product Guide:

We not only will try our greatest to offer you excellent services to each individual client, but also are ready to receive any suggestion offered by our buyers for China Wholesale Waste water Dissolved Oxygen Meter Factory Suppliers - DOG-208F Industrial Dissolved Oxygen Sensor – BOQU , The product will supply to all over the world, such as: Germany, Danish, Malawi, With the support of our highly experienced professionals, we manufacture and supply best quality products. These are quality tested at various occasions to ensure only flawless range is delivered to customers, we also customize the array as per the need of customers to meet the requirement of customers.

Chemical Oxygen Demand Analyzer