Wholesale China Ph Ec Sensor Factory Suppliers - PH8012 Industrial Waste Water PH Sensor – BOQU Detail:
Model No.: PH8012 |
Measuring range: 0-14pH |
Temperature range:0-60℃ |
Compressive strength:0.6MPa |
Slope: ≥96% |
Zero point potential: E0=7PH±0.3 |
Internal impedance: 150-250 MΩ (25℃) |
Profile: 3-in-1Electrode (Integrating the temperature compensation and the solution grounding) |
Installation size: Upper and Lower 3/4NPT Pipe Thread |
Connection: Low-noise cable goes out directly. |
Application: Applicable to various industrial sewages, environmental protection and water treatment. |
●It adopts the world-class solid dielectric and a large area of PTFE liquid for junction, non-block and easy |
maintenance. |
● Long-distance reference diffusion channel greatly extends the service life of electrodes in the harsh environment |
● It adopts PPS/PC casing and the upper and lower 3/4NPT pipe thread, so it is easy for installation and there is |
no need of the jacket, thus saving the installation cost. |
● The electrode adopts the high-quality low-noise cable, which makes the signal output length more than 20 |
meters free of interference. |
● There is no need for additional dielectric and there is a little amount of maintenance. |
● High measurement accuracy, fast responsing and good repeatability. |
● Reference electrode with silver ions Ag/AgCL |
● Proper operation shall make service life longer. |
● It can be installed in the reaction tank or pipe laterally or vertically. |
● The electrode can be replaced by a similar electrode made by any other country. |
Product detail pictures:




Related Product Guide:
The pretty loaded projects management experiences and one to a person support model make the high importance of business enterprise communication and our easy understanding of your expectations for Wholesale China Ph Ec Sensor Factory Suppliers - PH8012 Industrial Waste Water PH Sensor – BOQU , The product will supply to all over the world, such as: Birmingham, Lebanon, Dominica, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.

Write your message here and send it to us