Wholesale China Optical Dissolved Oxygen Probe Factory Suppliers - DOG-208F Industrial Dissolved Oxygen Sensor – BOQU

Short Description:

Product Detail

Feedback (2)

"Based on domestic market and expand overseas business" is our development strategy for Orp Electrode , Water Conductivity Tester , Ph Probe , We've been honest and open up. We glance ahead on your pay a visit to and developing trustworthy and long-term standing relationship.

Wholesale China Optical Dissolved Oxygen Probe Factory Suppliers - DOG-208F Industrial Dissolved Oxygen Sensor – BOQU Detail:

DOG-208F Dissolved Oxygen Electrode applicable for Polarography Principle

With platinum (Pt) as cathode and Ag / AgCl as anode

The electrolyte is 0.1 M potassium chloride (KCI).

The silicone rubber permeable membrane imported from U.S. serves as the permeable

membrane.

It has silicone rubber and steel gauze.

It is featured by collision resistance, corrosion resistance, high.temperature resistance, shape

retention and other performances

Measuring range: 0-100ug/L 0-20mg/L

Electrode material: 316L stainless steel

Temperature compensation resistor: 2.252K 22K Ptl00 Ptl000 etc

Sensor life: >3 years

Cable length: 5m (double shielded)

Detection lower Limit: 0.1ug/L(ppb)(20℃)

Measurement upper limit: 20mg/l(ppm)

Response time: ≤3min(90％, 20℃)

Polarization time: >8h

Minimum flow rate: 5cm/s; 515 L/h

Drift: <3%/month

Measurement error: <±1 ppb

Air current: 50-80nA Note: Maximum current 20-25 uA

Polarization voltage: 0.7V

Zero Oxygen: <5ppb(60min)

Calibration intervals: >60 days

Measured water temperature:0~60℃

Measuring range: 0-100ug/L 0-20mg/L

Electrode material: 316L stainless steel

Temperature compensation resistor: 2.252K 22K Ptl00 Ptl000 etc

Sensor life: >3 years

Cable length: 5m (double shielded)

Detection lower Limit: 0.1ug/L(ppb)(20℃)

Measurement upper limit: 20mg/l(ppm)

Response time: ≤3min(90％, 20℃)

Polarization time: >8h

Minimum flow rate: 5cm/s; 515 L/h

Drift: <3%/month

Measurement error: <±1 ppb

Air current: 50-80nA Note: Maximum current 20-25 uA

Polarization voltage: 0.7V

Zero Oxygen: <5ppb(60min)

Calibration intervals: >60 days

Measured water temperature:0~60℃

Applied to thermal power plants, power plant desalted water,.

boiler feed water etc places of trace oxygen content.

Product detail pictures:

Related Product Guide:

We constantly carry out our spirit of ''Innovation bringing advancement, Highly-quality guaranteeing subsistence, Administration selling advantage, Credit rating attracting buyers for Wholesale China Optical Dissolved Oxygen Probe Factory Suppliers - DOG-208F Industrial Dissolved Oxygen Sensor – BOQU , The product will supply to all over the world, such as: Madrid, Washington, Angola, We are sincerely looking forward to cooperate with customers all over the world. We believe we can satisfy you with our high-quality products and perfect service . We also warmly welcome customers to visit our company and purchase our products.

Dissolved Oxygen Controller

dissolved oxygen electrode

Dissolved Oxygen Meter

Dissolved Oxygen Meter For Aquaculture

dissolved oxygen probe

Dissolved Oxygen Sensor In Water

Dissolved Oxygen Temperature Meter

Handheld Dissolved Oxygen Meter

In Line Dissolved Oxygen Meter

The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.